HJ-PST系列亮度可调电源提供光源亮度的连续调节,每通道输出电压为12V或24V,可以利用外部触发实现频闪功能,以提高光源的亮度、延长光源的使用寿命。
You can use the external trigger to achieve the strobe function to increase the brightness of the light and extend the service life of the light.
HJ-PST系列电源的特点
① 亮度可调控制
② 外部触发频闪:将相机的触发信号输入到控制器,使光源进行频闪照明,适度提高光源的亮度,延长光源的使用寿命。控制器分正触发和负触发两种外触发方式,每种触发又分2种触发模式:电压触发和开关触发。正触发(常亮):电压触发时,高电压5-24V光源亮,低电压0-1.5V光源灭;开关触发时,断开状态光源亮,短接状态时光源灭。负触发(常灭):电压触发时,低电压0-1.5V光源亮,高电压5-24V光源灭;开关触发时,短接状态光源亮,断开状态光源灭。
Features of HJ - PST Series power
① Adjustable brightness control
② External trigger strobe: The controller has two kinds of external trigger, the positive trigger and the negative trigger, and each trigger is divided into two kinds of trigger modes: voltage trigger and trigger switch. The positive trigger (Always ON): when using voltage trigger, the light with high voltage of 5 - 24V is on and the light with low voltage 0 -1.5V is off; when using trigger switch, the light is on when disconnected, and the light is off when short circuit. Negative trigger (Always OFF): it always contrary with the positive trigger(Always ON).
Parameters are as follows:
输入电压范围 Input voltage | 180~260VAC |
输出电压范围 Output voltage | DC13V---DC24V;DC8.5V---DC12V |
最大输出电流 Maximum input current | 1A |
最大输出功率 Maximum output power | 24W |
使用环境温度 Temperature of environment for use | -10℃—55℃ |
使用环境湿度 Humidity of environment for use | 10% ~ 90%RH |
外部触发频率 External trigger frequency | 小于1/T,由频闪时间决定(T为1MS,则外部触发频率最大可达1K) When less than 1/T, it is determined by the stroboscopic time (T=1MS,means that the external trigger frequency is up to 1K) |
触发延长时间 Trigger extension time | <80US |
外部触发输入 External trigger input | 正负触发可以通过转换按钮切换 Positive and negative trigger can be switched by the convert button |
效率 | ≧75%,在典型输入电压和额定负载情况下。 |
电源建立时间 | ≤1S |
输出维持时间 | ≧10mS,在最小输入电压和最大负载时。 |
电源稳定度 | 在工作24小时后,电源各路输出电压的变化率≤±0.3% |
保护功能 Defensive function | 输出短路保护功能 protection of output short circuit |